အဲဒီမွာ တေယာက္ေယာက္က ဂိမ္းေတြ ေဒါင္းလုိဒ္ေတြ ပိတ္ဆြဲ ေတာ့ လုိင္းက က် ဒါမ်ိဳး ေတြ ၾကံဳဘူး
ၾကမယ္ထင္ပါတယ္။ဒီေန ေတာ့ကုိယ္သုံးတဲ့ network ထဲ မွာ အင္တာနက္ လုိင္းကုိ control လုပ္ ႏုိင္ျပီး သူမ်ား ေတြကုိလုိင္းျဖတ္လုိ ့ ရမယ့္ netcut ဆုိ တဲ့ ေဆာ့၀ဲေလးတခု တင္ေပးလုိက္ပါတယ္။အမွန္ဆုိရင္
ဒီေကာင္ေလးက ကုိယ္သုံးတဲ့ network လုိင္းထဲက ကြန္ပ်ဴတာေတြကုိ internet မ ရ ေအာင္ ပိတ္တဲ့ ေကာင္ေလး ေပါ့ ဗ်ာ သူမ်ားေတြ မရ ေတာ့ ကုိယ္တေယာက္ထဲ ယူထားတဲ့ လုိင္း
အကုန္ သုံးလုိ ရတာေပါ့ ကုိယ္ပိတ္ခ်င္တဲ့ စက္ ကုိလည္းေရြးပိတ္လုိ ရပါတယ္ ဒါေပမယ့္ သူမ်ားေတြကေတာ့ဘယ္ေက်နပ္မလဲ ေနာ့ ဒါလည္း hacking တမ်ိဳးပါဘဲ သူတုိ ့မသိ ေအာင္လည္း လုပ္ေပါ့ အင္တာနက္ လုိင္းပုိင္ရွင္ေတြ ဆုိင္ပုိင္ရွင္ေတြ အတြက္ကဒီလုိ မ်ိဳး netcut ေဆာ့ ၀ဲသုံး တဲ့ လူမ်ိဳးေတြ ပါ လာရင္ေတာ့ ေခါင္းစားျပီေပါ့။လုိခ်င္သူမ်ားေအာက္မွာ ေဒါင္းသြားႏုိင္ပါတယ္။
After a list of IP addresses of network users Lan / Hotspot (
left) buddy just choose which one you want the IP connections cut , click
cut off .
|
သူရဲ ့အလုပ္လုပ္ ပုံ နဲ ့ tool ေတြ ကုိ မူ ရင္းဆုိဒ္က ကူးျပီး ေဖၚျပေပးလုိက္ပါတယ္ ဒါေပ့မယ္ အဲဒါေတြမသိ လည္း ဘာမွ မျဖစ္ပါဘူး အဓိက သုံး လုိ ရ ျပီးတာဘဲ ။အင္တာနက္လုိင္းပုိင္
ရွင္ေတြကုိေတာ အားနာ ပါတယ္ဗ်ာ။
NetCut
This is a commonly used tool used on networks to cut down the network connection of victim. It makes a
Denial of Service attack on the Victim so that he doesn’t get internet
access. It does so by flooding the switch with unreal MAC address
entries that point to the victim’s ip address, so the packets are
mapped incorrectly and the victim receives no packets.
We use here 3 tools:
1.Netcut : To make Attack.
2.Ethereal : To Checks Packets.
3.AntiArp : To monitors and block all incoming and outgoing ARP traffic from / to pc.
1.Netcut : To make Attack.
2.Ethereal : To Checks Packets.
3.AntiArp : To monitors and block all incoming and outgoing ARP traffic from / to pc.
The AntiArp shows that It's sending fake Mac address to the gateway and It's disguised as the victim’s IPaddress. (while if we make a man in the middle attack , we can get victims MAC address and set is as our MAC addr and give victim other addr )
ေအာက္မွာ install လုပ္နည္းေသခ်ာဖတ္ျပီးမွ လုပ္ပါ ။
Install note for w 7
1. Install netcut.exe
2. Install Patch Update 3.0.exe
3. Install WinPcap_4_1_1.exe
4. Restart
2. Install Patch Update 3.0.exe
3. Install WinPcap_4_1_1.exe
4. Restart
Install note for w 8
to install Netcut in Windows 8 follow these steps :
open control panel and make sure to Category ( see picture )
Choose Program \u003e Run programs made for previous versions of windows
(see picture)
Click Next and select \u003e Not Listed \u003e Next ( see picture )
Note :hacking software အမ်ဳိးအစားထဲမွာ ပါတဲ့အတြက္ တခ်ိဳ ့anti-virus ေတြက လက္မခံရင္ ပိတ္
ျပီးမွ ျပန္လုပ္ပါ။
Credit>>> http://www.pyaephyo.com/2013/09/sharing-network-netcut-software-free.html
No comments:
Post a Comment